bolt cutter
KNIPEX 71 79 610 Ersatzmesserkopf für 71 72 610 komplett mit Schrauben
71 79 610 Ersatzmesserkopf für 71 72 610 Komplett mit Schrauben. Ersatzmesserkopf für 71 72 610. - HRC 19: Ø 9mm - HRC 40: Ø 8mm - HRC 48: Ø 7mm
VBW Bolzenschneider WAGGONIT® L.760mm, Schneidleistung 8mm²
Eigenschaften:Trennleistung bis 48 HRCMesserkopf aus verschleißfestem Spezialstahl, im Gesenk geschmiedetpräzises und einfaches Nachstellen der Messer durch Exzenterschraubenreduzierter Trennkraftaufwand durch optimale GeometrieBegrenzungsanschlag mit extra großer Pufferzonehochwertig vergütet für hohe Verschleißfestigkeitmit 2-Komponenten-Griffen
Ersatzkopf für Bolzenschneider, ELORA-288E-610
Produktinformation:ErsatzkopfAusführung:Messerkopf mit induktiv gehärteten Schneiden Schneidleistung bis 48 HRC Härte einfache und präzise Nachstellung durch doppelte Exzenterschrauben Schenkel aus Stahlrohr mit Griffschutzhüllen Messer aus Spezialstahl nach DIN ISO 9242
Ersatzkopf für Bolzenschneider, ELORA-288E-340
Produktinformation:ErsatzkopfAusführung:Messerkopf mit induktiv gehärteten Schneiden Schneidleistung bis 48 HRC Härte einfache und präzise Nachstellung durch doppelte Exzenterschrauben Schenkel aus Stahlrohr mit Griffschutzhüllen Messer aus Spezialstahl nach DIN ISO 9242
FACOM Bolzenschneider Rohrprofil axial 600mm
Produktstärken:Schneidmesser aus Hochleistungs-ChromstahlVerbesserte Härte der Schneidmesserfür längere SchneiddauerSpielnachstellung der Schneidmesserüber ExzenterschraubenErgonomische Griffe mit Handschutz
VBW bolt cutter with interchangeable blades L.760mm Cutting capacity 9mm²
Features:Extremely long service life thanks to double-sided interchangeable bladesCutting capacity up to 40 HRCCutter head made of wear-resistant special steel, drop-forgedWith adjustable bladesLimit stop with extra-large buffer zoneHigh-quality tempering for high wear resistanceWith 2-component handles
ALARM Guide pin min. D. 11.5 mm
True craftsmanship leaves nothing to chance – the perfect symbiosis of professional skills and excellent tools unleashes inspiring results. ALARM has been committed to this principle since 1867.Features:
ALARM bolt cutter M00 with interchangeable blades L.880mm cutting capacity 10mm²
True craftsmanship leaves nothing to chance – the perfect symbiosis of professional skills and excellent tools unleashes inspiring results. ALARM has been committed to this principle since 1867.Features:Infinitely adjustableLimit stop with extra-large buffer zoneFor standard reinforcing steel III + IV in accordance with DIN 488 – strength approx. 550 N/mm² – as well as for prestressing steel and tempered steel wire up to a strength of 1226 N/mm² (HRc 40)
KNIPEX 71 32 200 CoBolt® compact bolt cutter with slim multi-component handles, black atramentised, 200 mm
71 32 200 KNIPEX CoBolt® With precision cutting edges for soft, hard wire and piano wire. Cuts components such as bolts, nails, rivets, etc. up to Ø 5.2 mm. Particularly high cutting performance with low effort due to highly efficient joint construction. With recess for easier cutting of thicker wires. Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC. Opening spring and locking mechanism integrated into the handle sleeves for comfortable working and safe transport. With gripping surface under the joint for gripping and pulling wires from Ø 1.0 mm. - Cutting values for soft wire (diameter): Ø 6 mm - Cutting values for medium-hard wire (diameter): Ø 5.2 mm - Cutting values for hard wire (diameter): Ø 4.0 mm - Cutting values for piano wire (diameter): Ø 3.6 mm
Drill, ELORA-4490
Design: for sealing bags and connecting reinforcing bars with plastic handle
FACOM Bolzenschneider Rohrprofil axial 450mm
Produktstärken:Schneidmesser aus Hochleistungs-ChromstahlVerbesserte Härte der Schneidmesserfür längere SchneiddauerSpielnachstellung der Schneidmesserüber ExzenterschraubenErgonomische Griffe mit Handschutz
ALARM bolt cutter "Standard-Plus" L.470mm Cutting capacity 6mm²
True craftsmanship leaves nothing to chance – the perfect symbiosis of professional skills and excellent tools unleashes inspiring results. ALARM has been committed to this principle since 1867.Features:Reduction of the required manual force by up to 15%Limit stop with extra-large buffer zoneInfinitely adjustableFor standard reinforcing steel III + IV according to DIN 488 – strength approx. 550 N/mm² – as well as for prestressing steel and tempered steel wire up to a strength of 1570 N/mm² (HRc 48)
VBW knife head complete with screws f.439010
Features:For bolt cutters with interchangeable blades
STANLEY Bolzenschneider geschmiedet, 450 mm
Produktstärken:Schenkeltyp: geschmiedetZwei Schneidtypen: bündiger und mittiger SchnittStark und langlebig durch gesenkgeschmiedete Schneiden aus Chrom-MolybdenstahlLeistung und Effizienz: hohe Schneidleistung, Stahl bis 160 kg/mm² mit Durchschnitt bis 10mmSchutz der Exzenterschrauben vor SelbstlösungEntspricht GSA A-A-3047 SpezifikationenMesserkopf sicher verschraubt, auswechselbarRutschfeste Griffe für erhöhten Komfort und sicheres GreifenMinimaler Kraftaufwand beim SchneidenWiderstandsfähig gegen LösungsmittelGute Sichtbarkeit am Arbeitsplatz durch gelben Korpus mit schwarz phosphatierten SchneidköpfenNachstellung der Schneidmesser über Exzenterschrauben
VBW knife head complete with screw and eccentric screws
Features:For grating and flat material cutter No. 480Made of wear-resistant special steel 7-piece set: 1 x cutter head 3 x eccentric screws 3 x nuts
ALARM Tension wire cutter 40° L.630mm Cutting capacity 8mm²
True craftsmanship leaves nothing to chance – the perfect symbiosis of professional skills and excellent tools unleashes inspiring results. ALARM has been committed to this principle since 1867.Features:Infinitely adjustableLimit stop with extra-large buffer zoneFor standard reinforcing steel III + IV according to DIN 488 – strength approx. 550 N/mm² – as well as for prestressing steel and tempered steel wire up to a strength of 1570 N/mm² (HRc 48)With 40° offset blades for cutting off protruding tension wires on concrete walls
VBW bolt cutter with interchangeable blades L.460mm Cutting capacity 6mm²
Features:Extremely long service life thanks to double-sided interchangeable bladesCutting capacity up to 40 HRCCutter head made of wear-resistant special steel, drop-forgedWith adjustable bladesLimit stop with extra-large buffer zoneHigh-quality tempered for high wear resistanceWith 2-component handles
ALARM Cutting head for bolt cutter f.20352
True craftsmanship leaves nothing to chance – the perfect symbiosis of professional skills and excellent tools unleashes inspiring results. ALARM has been committed to this principle since 1867.Features:
VBW bolt cutter with interchangeable blades L.610mm Cutting capacity 8mm²
Features:Extremely long service life thanks to double-sided interchangeable bladesCutting capacity up to 40 HRCCutter head made of wear-resistant special steel, drop-forgedWith adjustable bladesLimit stop with extra-large buffer zoneHigh-quality tempering for high wear resistanceWith 2-component handles
VBW knife head complete with screws f.984050
Features:For bolt/corner deep cutters
VBW knife head complete with screws for 980015
Features:For WAGGONIT® bolt cutters
KNIPEX 71 01 200 CoBolt® compact bolt cutter with plastic coating, black atramentised, 200 mm
71 01 200 KNIPEX CoBolt® With precision cutting edges for soft, hard wire and piano wire. Cuts components such as bolts, nails, rivets, etc. up to Ø 5.2 mm. Particularly high cutting performance with low effort due to highly efficient joint construction. Inductively hardened cutting edges, cutting edge hardness approx. 64 HRC. Microstructured cutting edge reduces slipping of cutting materials from the pliers jaws. With gripping surface below the joint for gripping and pulling wires from Ø 1.0 mm. - Cutting values for soft wire (diameter): Ø 6 mm - Cutting values for medium-hard wire (diameter): Ø 5.2 mm - Cutting values for hard wire (diameter): Ø 4.0 mm - Cutting values for piano wire (diameter): Ø 3.6 mm
Structural steel mesh cutter, ELORA-289-900
Design: Cutting head with induction-hardened cutting edges Head angled at 75° Simple and precise adjustment thanks to double eccentric screws in accordance with DIN ISO 5743 Steel tube handles with protective covers Blades made of special steel
VBW bolt cutter with interchangeable blades L.910mm Cutting capacity 13mm²
Features:Extremely long service life thanks to double-sided interchangeable bladesCutting capacity up to 40 HRCCutter head made of wear-resistant special steel, drop-forgedWith adjustable bladesLimit stop with extra-large buffer zoneHigh-quality tempering for high wear resistanceWith 2-component handles