VDE side cutters
STAHLWILLE VDE side cutters L.160mm Chrome-plated head 2-component handles
Features:Side cutters with semi-circular head for cutting cables and soft and hard wires, including piano wireCutting with cutting bevelDie-forged, made of tempered tool steelCutting edge additionally induction hardened to approx. 64 HRCVDE insulated up to 1,000 VProtective insulation according to IEC 60900-AC 1,000 V / DC 1,500 VChrome-platedWith 2-component handleDIN ISO 5749 Form B
VDE universal side cutters with insulated handle protection sleeves, ELORA-950-180
Design: high cutting performance with low effort maximum service life thanks to additional induction hardening Blade hardness: 63-65 HRC for hardened steel wire, piano wire (tensile strength 2300 N/mm²) chrome-plated, polished, with non-slip QUATROLIT® 2K handle protection sleeves VDE-insulated to 1,000 V, in accordance with EN 60900/IEC 60900 ELORA heat-treated steel C60 / 1.0601
KNIPEX 74 06 180 Heavy-duty side cutters, insulated with multi-component handles, VDE-tested, chrome-plated, 180 mm
74 06 180 Heavy-duty side cutters For the toughest, most demanding applications. High cutting performance with minimal effort thanks to the optimum coordination of cutting angle and transmission ratio. Precision cutting edges additionally induction hardened (cutting edge hardness approx. 64 HRC), for all types of wire including piano wire. - Cutting values for medium-hard wire (diameter): Ø 3.8 mm - Cutting values for hard wire (diameter): Ø 2.7 mm - Cutting values for piano wire (diameter): Ø 2.2 mm - VDE-tested: yes
KNIPEX 74 06 250 Kraft-Seitenschneider isoliert mit Mehrkomponenten-Hüllen, VDE-geprüft verchromt 250 mm
74 06 250 Kraft-Seitenschneider Für härteste, dauerhafte Beanspruchung. Hohe Schneidleistung bei geringem Kraftaufwand durch optimale Abstimmung von Schneidenwinkel und Übersetzungsverhältnis. Präzisionsschneiden zusätzlich induktiv gehärtet (Schneidenhärte ca. 64 HRC), für alle Drahtsorten einschließlich Pianodraht. der 250 mm lange Seitenschneider ist geeignet für Cu-Leiter bis 16 mm² und Al-Leiter bis 35 mm². - Schneidwerte mittelharter Draht (Durchmesser): Ø 4,6mm - Schneidwerte harter Draht (Durchmesser): Ø 3,5mm - Schneidwerte Pianodraht (Durchmesser): Ø 3,0mm - VDE-geprüft: ja
KNIPEX 74 07 200 Kraft-Seitenschneider tauchisoliert, VDE-geprüft verchromt 200 mm
74 07 200 Kraft-Seitenschneider Rundum leistungsstark: optimale Kombination von Schnittkraft, Haltbarkeit und Ergonomie. Schneidet dank Kraft-Gelenk spürbar leichter als herkömmliche Seitenschneider gleicher Größe. Optimiert: ca. 20% Kraftersparnis im Vergleich zum Vorgängermodell. Für härteste, dauerhafte Beanspruchung. Ermöglicht präziseres Arbeiten durch näher am Gelenk liegende Griffhüllen. Verfeinerte Schenkelform für besseren Halt. - Schneidwerte mittelharter Draht (Durchmesser): Ø 4,2mm - Schneidwerte harter Draht (Durchmesser): Ø 3,0mm - Schneidwerte Pianodraht (Durchmesser): Ø 2,5mm - VDE-geprüft: ja
KNIPEX 74 06 200 SB Heavy-duty side cutters, insulated with multi-component handles, VDE-tested, chrome-plated, 200 mm
74 06 200 SB Power side cutters All-round performance: optimum combination of cutting force, durability and ergonomics. Cuts noticeably easier than conventional side cutters of the same size thanks to the power joint. Optimised: approx. 20% less effort required compared to the previous model. For the toughest, most demanding applications. Enables more precise work thanks to handle sleeves positioned closer to the joint. Refined shank shape for better grip. Precision cutting edges additionally induction hardened (cutting edge hardness approx. 64 HRC), for all types of wire including piano wire. - Cutting values for medium-hard wire (diameter): Ø 4.2 mm - Cutting values for hard wire (diameter): Ø 3.0 mm - Cutting values for piano wire (diameter): Ø 2.5 mm - VDE-tested: yes
FACOM Diagonal-Seitenschneider VDE 180mm
Produktstärken:Neues Backenprofil für längere Lebensdauer und größeren SchneidbereichSchneiden, die bei jedem Drahttyp für einen sauberen Schnitt sorgen: weicher Draht, moderne Werkstoffe und Pianodraht gemäß den folgenden Abmessungen: 192A.18VE: 2,2 mm 205 kg/mm²Die Geometrie senkt die Schneidkraft dank einer versetzten Achse und einem speziellen Schneidprofil erheblichBesonders beständige, gut schneidende, induktionsgehärtete Kohlenstoffstahl-LegierungErgonomische, chemikalienbeständige Bi-Material-Überzüge mit:- Rückholfeder- Haltering(der Haltering erhöht die Nennlänge um 10 mm)Ausführung: Verchromt, korrosionsbeständig
KNIPEX 73 06 160 X-Cut® compact side cutters, high leverage, insulated with multi-component handles, VDE-tested, chrome-plated, 160 mm
73 06 160 KNIPEX X-Cut® cuts the finest wires as well as multi-strand cables and hard piano wire with precision. Powerful, light and universal. High cutting performance with low effort due to the optimum coordination of cutting angle and transmission ratio. Through-joint: maximum stability with low weight. Double-bearing joint axis for hard, continuous use. Large opening width for thicker cables. Precise cut even with fine copper strands. Compact, weight-saving design. Universal use in assembly, maintenance and production. 40% less effort required compared to standard side cutters of the same length. Precision cutting blades additionally induction hardened (cutting hardness approx. 62 HRC) for all types of wire, including piano wire. - Cutting values for soft wire (diameter): Ø 4.8 mm - Cutting values for medium-hard wire (diameter): Ø 3.8 mm - Cutting values for hard wire (diameter): Ø 2.7 mm - Cutting values for piano wire (diameter): Ø 2.2 mm - Cutting value for multi-strand copper cable: Ø 12.0 mm - VDE-tested: yes
KNIPEX 74 06 200 Heavy-duty side cutters, insulated with multi-component handles, VDE-tested, chrome-plated, 200 mm
74 06 200 Power side cutters All-round performance: optimum combination of cutting force, durability and ergonomics. Cuts noticeably easier than conventional side cutters of the same size thanks to the power joint. Optimised: approx. 20% less effort required compared to the previous model. For the toughest, most demanding applications. Enables more precise work thanks to handle sleeves positioned closer to the joint. Refined shank shape for better grip. Precision cutting edges additionally induction hardened (cutting edge hardness approx. 64 HRC), for all types of wire including piano wire. - Cutting values for medium-hard wire (diameter): Ø 4.2 mm - Cutting values for hard wire (diameter): Ø 3.0 mm - Cutting values for piano wire (diameter): Ø 2.5 mm - VDE-tested: yes
Seitenschneider 160 mm VDE PROJAHN Made in Germany
Seitenschneider 160 mm VDE PROJAHN Made in GermanyHöchste Sicherheit bei Arbeiten an elektrischen Anlagen durch Prüfung nach DIN EN 60900 und IEC 900Sicher auch bei extremen Einsatzbedingungen durch geprüfte Kaltschlagfestigkeit bei -40°CSeitenschneider zum Schneiden von harten und weichen DrähtenAus Spezial-Werkzeugstahl, geschmiedet, ölgehärtetPräzisionsschneiden für feinste DrähteGriffe mit ergonomisch geformten Mehrkomponenten-Sicherheitshüllen nach DIN EN/IEC 60900Kraftgewerbe mit optimaler Hebelübersetzung für einfaches und ermüdungsarmes ArbeitenZusätzlich induktiv gehärtete Schneiden erweitern Einsatzbereich und verlängern LebensdauerSchneidenhärte ca. 62 HRC
KNIPEX 70 06 160 Insulated side cutters with multi-component handles, VDE-tested, chrome-plated, 160 mm
70 06 160 Side cutters with slim head shape for use in hard-to-reach work areas. The indispensable side cutters for versatile use. High-quality material and precise workmanship for a long service life. Precision cutting for soft and hard wire. Clean cut on thin copper wires, even at the cutting tips. Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC. VDE-tested safety up to 1000 volts. With facet. Cutting values for soft wire (diameter): Ø 4.0 mm Cutting values for medium-hard wire (diameter): Ø 3.0 mm Cutting values for hard wire (diameter): Ø 2.0 mm VDE-tested: yes
KNIPEX 73 06 160 T X-Cut® compact side cutters, insulated with multi-component handles, VDE-tested; with integrated insulated fastening eyelet for attaching a fall protection device, chrome-plated, 160 mm
73 06 160 T KNIPEX X-Cut® cuts the finest wires as well as multi-strand cables and hard piano wire with precision. Powerful, light and universal. High cutting performance with minimal effort thanks to the optimal coordination of the cutting angle and transmission ratio. Through-joint: maximum stability with low weight. Double-bearing joint axis for hard, continuous use. Large opening width for thicker cables. Precise cut even with fine copper strands. Compact, weight-saving design. Universally applicable in assembly, maintenance and production. 40% less effort required compared to standard side cutters of the same length. Pliers with integrated insulated fastening eyelet for attaching a fall protection device. - Cutting values for soft wire (diameter): Ø 4.8 mm - Cutting values for medium-hard wire (diameter): Ø 3.8 mm - Cutting values for hard wire (diameter): Ø 2.7 mm - Cutting values for piano wire (diameter): Ø 2.2 mm - Cutting value for multi-strand copper cable: Ø 12.0 mm - Fall protection: yes - VDE-tested: yes
KNIPEX 70 06 160 T Insulated side cutters with multi-component handles, VDE-tested; with integrated insulated fastening eyelet for attaching a fall protection device, chrome-plated, 160 mm
70 06 160 T Side cutters with slim head shape for use in hard-to-reach work areas. The indispensable side cutters for versatile use. High-quality material and precise workmanship for a long service life. Precision cutting for soft and hard wire. Clean cut on thin copper wires, even at the cutting tips. Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC. With extended cutting edge. Pliers with integrated insulated fastening eyelet for attaching a fall protection device. - Cutting values for soft wire (diameter): Ø 4.0 mm - Cutting values for medium-hard wire (diameter): Ø 3.0 mm - Cutting values for hard wire (diameter): Ø 2.0 mm - Fall protection: yes - VDE-tested: yes
KNIPEX 70 07 180 Side cutters, dip-insulated, VDE-tested, chrome-plated, 180 mm
70 07 180 Side cutters with slim head shape for use in hard-to-reach work areas. The indispensable side cutters for versatile use. High-quality material and precise workmanship for a long service life. Precision cutting for soft and hard wire. Clean cut on thin copper wires, even at the cutting tips. Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC. With facet. - Cutting values for soft wire (diameter): Ø 4.0 mm - Cutting values for medium-hard wire (diameter): Ø 3.0 mm - Cutting values for hard wire (diameter): Ø 2.5 mm - VDE-tested: yes
VDE power side cutters with insulated handle protection sleeves, ELORA-955-160
Design: high cutting performance with low effort maximum service life thanks to additional induction hardening Blade hardness: 63-65 HRC for hardened steel wire, piano wire (tensile strength 2300 N/mm²) chrome-plated, polished, with non-slip QUATROLIT® 2K handle protection sleeves VDE-insulated to 1,000 V, in accordance with EN 60900/IEC 60900 ELORA heat-treated steel C60 / 1.0601
VDE universal side cutters with insulated handle protection sleeves, ELORA-950-160
Design: high cutting performance with low effort maximum service life thanks to additional induction hardening Blade hardness: 63-65 HRC for hardened steel wire, piano wire (tensile strength 2300 N/mm²) chrome-plated, polished, with non-slip QUATROLIT® 2K handle protection sleeves VDE-insulated to 1,000 V, in accordance with EN 60900/IEC 60900 ELORA heat-treated steel C60 / 1.0601
KNIPEX 70 26 160 Insulated side cutters with multi-component handles, VDE-tested, chrome-plated, 160 mm
70 26 160 Side cutters with slim head shape for use in hard-to-reach work areas. The indispensable side cutters for versatile use. High-quality material and precise workmanship for a long service life. Precision cutting for soft and hard wire. Clean cut on thin copper wires, even at the cutting tips. Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC. With small facet. - Cutting values for soft wire (diameter): Ø 4.0 mm - VDE-tested: yes
KNIPEX 74 06 250 T Heavy-duty side cutters, insulated with multi-component handles, VDE-tested; with integrated insulated fastening eyelet for attaching a fall protection device, chrome-plated, 250 mm
74 06 250 T Heavy-duty side cutters For the toughest, most demanding applications. High cutting performance with minimal effort thanks to the optimal coordination of the cutting angle and transmission ratio. Precision cutting blades additionally induction hardened (cutting hardness approx. 64 HRC), for all types of wire including piano wire. Pliers with integrated insulated fastening eyelet for attaching a fall protection device. - Cutting values for medium-hard wire (diameter): Ø 4.6 mm - Cutting values for hard wire (diameter): Ø 3.5 mm - Cutting values for piano wire (diameter): Ø 3.0 mm - Fall protection: yes - VDE-tested: yes
FACOM Diagonal-Seitenschneider 165mm VDE
Produktstärken:Schlanker Kopf für schwierige oder enge Zugänge (Schaltschränke, Verdrahtungsarbeiten usw.)Für glattes Abschneiden aller Drahtsorten ausgelegte Schneiden: Pianodraht, weiche Drähte, moderne Werkstoffe usw. - 391A.16VE: 1.6mm 220 kg/mm²Große Hebelübersetzung und versetzte Achse für minimalen Kraftaufwand beim SchneidenLange Lebensdauer dank Chrom-Molybdän-Vanadium-Stahl, mit induktionsgehärteten SchneidenErgonomische, chemikalienbeständige Bi-Material-Griffe mit: - Unterstützende Rückholfeder.- Befestigungsbereiter Befestigungspunkt (durch den Befestigungspunkt verlängert sich die Nennlänge um 10 mm)Korrosionsgeschützte, lackierte Ausführung
VDE universal side cutters with insulated handle protection sleeves, ELORA-950-145
Design: high cutting performance with low effort maximum service life thanks to additional induction hardening Blade hardness: 63-65 HRC for hardened steel wire, piano wire (tensile strength 2300 N/mm²) chrome-plated, polished, with non-slip QUATROLIT® 2K handle protection sleeves VDE-insulated to 1,000 V, in accordance with EN 60900/IEC 60900 ELORA heat-treated steel C60 / 1.0601
KNIPEX 70 07 160 Side cutters, dip-insulated, VDE-tested, chrome-plated, 160 mm
70 07 160 Side cutters with slim head shape for use in hard-to-reach work areas. The indispensable side cutters for versatile use. High-quality material and precise workmanship for a long service life. Precision cutting for soft and hard wire. Clean cut on thin copper wires, even at the cutting tips. Cutting edges additionally induction hardened, cutting edge hardness approx. 61 HRC. With extended cutting edge. With facet. Cutting values for soft wire (diameter): Ø 4.0 mm Cutting values for medium-hard wire (diameter): Ø 3.0 mm Cutting values for hard wire (diameter): Ø 2.0 mm VDE-tested: yes
STAHLWILLE VDE high-torque side cutters L.160mm Chrome-plated head Handles 2-component handles
Features:Heavy-duty side cutters with semi-circular, compact head for cutting all types of wireDie-forged, made of tempered tool steelCutting edges additionally induction hardened to approx. 64 HRCVDE insulated up to 1,000 VProtective insulation according to IEC 60900-AC 1,000 V / DC 1,500 VChrome-platedWith 2-component handle DIN ISO 5749
KNIPEX 74 07 250 Heavy-duty side cutters, dip-insulated, VDE-tested, chrome-plated, 250 mm
74 07 250 Heavy-duty side cutters For the toughest, most demanding applications. High cutting performance with minimal effort thanks to the optimum coordination of the cutting angle and transmission ratio. The 250 mm long side cutters are suitable for copper conductors up to 16 mm² and aluminium conductors up to 35 mm². - Cutting values for medium-hard wire (diameter): Ø 4.6 mm - Cutting values for hard wire (diameter): Ø 3.5 mm - Cutting values for piano wire (diameter): Ø 3.0 mm - VDE-tested: yes
Kraft Seitenschneider 180 mm VDE PROJAHN Made in Germany
Kraft Seitenschneider 180 mm VDE PROJAHN Made in GermanyHöchste Sicherheit bei Arbeiten an elektrischen Anlagen durch Prüfung nach DIN EN 60900 und IEC 900Sicher auch bei extremen Einsatzbedingungen durch geprüfte Kaltschlagfestigkeit bei -40°CKraft-Seitenschneider für härteste AnwendungenAus Spezial-Werkzeugstahl, geschmiedet, ölgehärtetPräzisionsschneiden für Pianodraht (D2-Qualität)Griffe mit ergonomisch geformten Mehrkomponenten-Sicherheitshüllen nach DIN EN/IEC 60900Kraftgewerbe mit optimaler Hebelübersetzung für einfaches und ermüdungsarmes ArbeitenZusätzlich induktiv gehärtete Schneiden erweitern Einsatzbereich und verlängern Lebensdauer