VDE shears
KNIPEX 95 16 165 T Cable shears, insulated with multi-component handles, VDE-tested; with integrated insulated fastening eyelet for attaching a fall protection device, chrome-plated, 165 mm
95 16 165 T Cable cutters cut smoothly and cleanly without crushing. Easy cutting with one-handed operation. Adjustable screw joint, self-locking. Cuts fine-stranded copper and aluminium multi-core cables up to Ø 15 mm (50 mm²). Not suitable for steel wire and hard-drawn copper conductors. Hardened cutting edges with precision grinding. With clamp protection. With integrated insulated fastening eyelet for attaching a fall protection device. - Cutting capacity for multi-strand copper cable: 50 mm² - Cutting capacity for multi-strand copper cable: Ø 15 mm - AWG: 1/0 - Fall protection: yes - VDE-tested: yes
KNIPEX 95 26 165 Cable shears with opening spring, insulated with multi-component handles, VDE-tested, chrome-plated, 165 mm
95 26 165 Cable shears cut smoothly and cleanly without crushing. Easy cutting with one-handed operation. Adjustable screw joint, self-locking. Cuts fine-stranded copper and aluminium multi-core cables up to Ø 15 mm (50 mm²). Not suitable for steel wire and hard-drawn copper conductors. Hardened cutting edges with precision grinding. With clamp protection. Opening spring located in the joint, protected and captive. - Cutting capacity for multi-wire copper cable: 50 mm² - Cutting capacity for multi-wire copper cable: Ø 15 mm - AWG: 1/0 - VDE-tested: yes
KNIPEX 95 16 160 StepCut® cable cutter, insulated with multi-component handles, VDE-tested, chrome-plated, 160 mm
95 16 160 KNIPEX StepCut® Small, light, strong: comfortable cutting without pinching, with a size of only 160 mm. Noticeably less effort required: the steps cut the wires one after the other, making cutting up to 40% easier than with standard cable cutters of the same length! Ergonomic leg design: optimum cutting feel even with larger cable diameters. Cuts fine-stranded copper and aluminium multi-core cables up to Ø 15 mm (50 mm²). Cuts solid copper and aluminium cables up to 5 x 4 mm². Cuts without crushing. Screwed joint: precise, smooth-running, durable. Clamp protection for safe working. Not suitable for steel wire and hard-drawn copper conductors. Cutting edges additionally induction hardened, cutting edge hardness approx. 56 HRC. - Cutting capacity for multi-strand copper cable: 50 mm² - Cutting capacity for multi-strand copper cable: Ø 15 mm - AWG: 1/0 - VDE-tested: yes
KNIPEX 95 18 225 StepCut® XL cable cutter with step cut, insulating multi-component handle, VDE-tested, burnished, 225 mm
95 18 225 KNIPEX StepCut® XL With power joint, long handles and optimised cutting edges: noticeably easier cutting than with compact cable cutters. Enormous capacity: cuts solid copper or aluminium cables up to 35 mm², stranded cables up to 70 mm² and fine-stranded cables up to 120 mm². Two cutting ranges: the stepped main cutting edge always holds smaller and larger cables close to the joint when cutting, while the front cutting edge is used for step-by-step cutting ("nibbling") of very large cables. Comfortable one-hand and two-hand operation even with large cable diameters due to minimised arm width. Bolted power joint: high transmission ratio, smooth-running, adjustable. Slim head for better accessibility. Clamp protection for safe working. Not suitable for steel-reinforced cables, such as ACSR. Cutting edges additionally laser-hardened, cutting edge hardness approx. 56 HRC.
KNIPEX 95 17 200 Cable shears with double cutting edge, dip-insulated, VDE-tested, chrome-plated, 200 mm
95 17 200 Cable cutters cut smoothly and cleanly without crushing. By dividing the cutting process into a preliminary cut (insulation sheath in the front cutting area) and a final cut (conductor in the rear cutting area), cables up to Ø 20 mm can be cut with one hand. Clamp protection prevents crushing injuries. For cutting copper and aluminium cables up to Ø 20 mm (70 mm²). Not suitable for steel wire and hard-drawn copper conductors. Hardened cutting edges with precision grinding. Low effort required thanks to favourable transmission ratios and special cutting geometry. Adjustable screw joint, self-locking. - Cutting capacity for multi-strand copper cable: 70 mm² - Cutting capacity for multi-strand copper cable: Ø 20 mm - AWG: 2/0 - VDE-tested: yes
VDE cable cutter with dip insulation, ELORA-985
Design: ground cutting edges, maximum service life thanks to additional induction hardening Cutting edge hardness: 65 HRC for copper and aluminium cables, burnished Handle protective sleeves with 2-colour multi-layer insulation (yellow, red) to make damage to the insulation easier to detect VDE insulated up to 1,000V, according to EN 60900/IEC 60900:2004 ELORA tempered steel C60 / 1.0601
KNIPEX 95 16 200 Cable cutter with double cutting edge, insulated with multi-component handles, VDE-tested, chrome-plated, 200 mm
95 16 200 Cable cutters cut smoothly and cleanly without crushing. By dividing the cutting process into a preliminary cut (insulation sheath in the front cutting area) and a final cut (conductor in the rear cutting area), cables up to Ø 20 mm can be cut with one hand. Clamp protection prevents crushing injuries. For cutting copper and aluminium cables up to Ø 20 mm (70 mm²). Not suitable for steel wire and hard-drawn copper conductors. Hardened cutting edges with precision grinding. Low effort required thanks to favourable transmission ratios and special cutting geometry. Adjustable screw joint, self-locking. - Cutting capacity for multi-strand copper cable: 70 mm² - Cutting capacity for multi-strand copper cable: Ø 20 mm - AWG: 2/0 - VDE-tested: yes
STAHLWILLE VDE cable cutter L.220mm Chrome-plated head, dip-insulated handles, DIN EN 60900, #T; AC/1000 V
Properties:For copper and aluminium cablesEasy, clean cut with one-handed operationSpecial cutting geometry prevents pressure marks and frayed endsAdjustable screw jointVDE-insulated up to 1,000 VProtective insulation according to IEC 60900-AC 1,000 V / DC 1,500 VWith clamp protectionNot suitable for steel wire and steel-armoured cablesChrome-plated
KNIPEX 95 06 230 Cable shears Handles with plastic coating Insulated, with plastic coating, VDE-tested 230 mm
95 06 230 Cable cutter Not suitable for steel wire and hard-drawn copper conductors. Hardened cutting edges with precision grinding. No crushing, minimal deformation of the cable. Adjustable screw joint. For single-wire copper conductors up to 16 mm², multi-wire conductors up to 50 mm² and fine-wire conductors up to 70 mm²; for multi-wire aluminium conductors up to 70 mm². Easy cutting with one-handed operation thanks to high transmission ratio. Special stainless steel, hardened and tempered. Cutting capacity for multi-strand copper cables: 50 mm² Cutting capacity for multi-strand copper cables: Ø 16 mm AWG: 1/0 VDE-tested: yes
KNIPEX 95 17 500 Cable shears, dip-insulated, VDE-tested, 500 mm
95 17 500 Cable shears Low weight, high transmission ratio. Low effort required thanks to favourable transmission ratios and special cutting geometry. For cutting copper and aluminium cables, single and multi-stranded. Hardened cutting edges with precision grinding. Cuts smoothly and cleanly without crushing. Not suitable for steel wire and wire ropes. Anti-pinch protection prevents crushing injuries. Adjustable screw joint. - Cutting capacity for multi-strand copper cable: 150 mm² - Cutting capacity for multi-strand copper cable: Ø 27 mm - AWG: 6/0 - VDE-tested: yes
KNIPEX 95 16 165 Cable shears, insulated with multi-component handles, VDE-tested, chrome-plated, 165 mm
95 16 165 Cable shears cut smoothly and cleanly without crushing. Easy cutting with one-handed operation. Adjustable screw joint, self-locking. Cuts fine-stranded copper and aluminium multi-core cables up to Ø 15 mm (50 mm²). Not suitable for steel wire and hard-drawn copper conductors. Hardened cutting edges with precision grinding. With clamp protection. - Cutting capacity for multi-strand copper cable: 50 mm² - Cutting capacity for multi-strand copper cable: Ø 15 mm - AWG: 1/0 - VDE-tested: yes